Hera Technologies LLC
Position:
Metrology Inspector - Cape Canaveral, FL 32920 USAJob Description
Summary:
Hera Technologies, LLC is seeking a highly motivated Metrology Inspector to join our team working in a hands-on, collaborative environment.
The individual will perform receiving, in-process, final inspection & 1st article approval of manufactured and assembled hardware.
They will verify processes as required to ensure drawing and material specifications are satisfied.
The successful candidate must be familiar with a manufacturing environment, have computer knowledge, a self-starter who pays attention to detail and accuracy and taking responsibility for their work.
FLSA Classification:
Hourly NonexemptType:
Full-timeWork hours:
Monday - Friday, 6:
30am-2:
30pm.
Some overtime and weekend work may be necessary.
Hours may be adjusted at the discretion of your supervisor.
Salary Range:
$25.
00 - $32.
00 per hourReports to:
Quality ManagerLocation:
100% at 350 Imperial Blvd.
Cape Canaveral, FL 32920 USAEssential Duties (which include, but not limited to):
Conduct in-process and/or final inspections of parts as required using FARO inspection arm and Polyworks software, or other tools as necessary.
Ensure material products and processes (paint, anodize, chem-film, etc.
) are applied in accordance with applicable drawings and specification requirements.
Oversee the receipt and inspection of incoming material to ensure they meet job requirements per print and purchase orders.
Create AS9102 compliant FAIR's for customer approval as required.
Use InspectionXpert to balloon prints and generate DIR and AS9102 forms.
Manage part configuration revision changes for Print to CAD errors and create verisurf validation reports.
Manage calibrated tools to ensure that gages and measuring instruments are within calibration interval prior to use.
Serve as the Quality Assurance representative to the Materials Review Board (MRB) and manage the MRB process.
Ensure nonconforming materials are isolated/quarantined from acceptable parts and are properly documented and controlled.
Lead Root Cause and Corrective Action investigations, interfacing with the Hera team as applicable.
Interface with customers on complaints & returns, and on customer corrective action requests.
Interfacing with machinists and production personnel related to his/her workmanship and determine if other quality issues exist.
Review initial job templates for accuracy using customer blueprints, purchase orders and customer specifications.
Review and stamp off on released travelers that require Traveler Review.
Review all customer purchase orders for acceptance and quality clauses implementation as required.
Prepare shipments packets per customer purchase order for completed jobs ready to ship.
Scheduling of in-process and final inspection source for various customers as required per purchase orders.
Coordinate customer-required audits and act as primary contact during the entire audit process.
Coordinate and execute internal procedural and part configuration audits at planned intervals and provide information on whether the quality management system conform to:
Internal QMS, Requirements of AS9100, Customer requirements.
Learn cross-functional operations and provide training to the team to perform cross-functional operations.
Support 5-S and adhere to health, safety, and environmental company guidelines.
The above statements are intended to describe the general nature and level of work being performed by the individual(s) assigned to this position.
Management reserves the right to modify, add, or remove duties and to assign other duties as necessary.
They are not intended to be an exhaustive list of all duties, responsibilities, and skills required.
Minimum Requirements:
Knowledge of PCMM Faro Arm w/Laser line probe and familiarity with Polyworks IMinspect and/or Verisurf.
Minimum 3 years' Inspection/Quality experience in manufacturing environment.
Must have computer understanding of Microsoft Word, Excel and Outlook.
Must be able to interpret drawings including GD&T.
Ability to multi-task and prioritize inspection duties,Ability to work with others in a fast-changing environment.
Ability to understand PO requirements and verification of Certificate of Conformance.
Knowledge of mechanical measuring tools including but not limited to, micrometers, calipers, scales, pin and radius gages, height gage, surface finish comparator, dial indicator, etc.
Ability to communicate effectively in oral and written English.
Ability to learn cross-functional operations and provide training to the team to perform cross-functional operations.
Work authorization:
Must be US Citizen or Authorized to work in the US.
Must be willing to undergo and pass a criminal background check.
Must be able to pass a pre-employment physical examination, including an alcohol and drug test.
Work environment:
Employees spend most of the day on their feet and must follow strict safety rules.
They wear safety glasses to protect their eyes from airborne debris.
Loud noise from machinery requires the use of hearing protectors.
They wear hard toe shoes or boots to protect their feet from potentially dropped objects.
Physical requirements:
Prolonged periods sitting at a desk and working on a computer.
Must be able to safely lift 25 pounds at times.
Ability to stand for extensive periods of time.
Sit, Stoop, Kneel and Crouch.
Must be able to navigate warehouse and reach items both high and low.
Hera Technologies, LLC Company ProfileHera Technologies, LLC is a world-class contract Aerospace Manufacturing firm that produces high quality built-to-print and built-to-model metallic and nonmetallic components for the Space, Aerospace, Defense, and Commercial Airline industries.
We are a team of talented, ethical and motivated individuals committed to providing our customers with superior quality products delivered on time and aimed to exceed customer expectations.
We provide a safe and rewarding work environment that acknowledges individual achievement and promotes entrepreneurial spirit, and teamwork.
Hera Technologies, LLC specializes in CNC machining, knife cutting, laser cutting, structural bonding and painting, processing and kitting of a wide variety of metallic, and engineered materials.
Our CNC work centers, high-speed routing machines and knife cutting systems offer 2D cutting and 3, 4 and 5-axis milling of a wide range of materials including:
single-ply materials, composites, honeycomb core, plastics, ferrous and non-ferrous metals.
Benefits:
Company paid employee medical, dental and vision insurance Retirement plan option upon eligibility Paid Time Off (PTO) 10 paid holidays Tuition reimbursement Discretionary bonuses Incentivized cash-based employee referral programMany other great company perks including Hera branded merchandise, a great work environment, and a supportive management team!Hera Technologies is proud to be an Equal Opportunity Employer.
We maintain a drug-free workplace and retain the option to perform substance abuse testing before and during employment.
About the Company:
Hera Technologies LLC.
Estimated Salary: $20 to $28 per hour based on qualifications.
Metrology Inspector - Cape Canaveral, FL 32920 USAJob Description
Summary:
Hera Technologies, LLC is seeking a highly motivated Metrology Inspector to join our team working in a hands-on, collaborative environment.
The individual will perform receiving, in-process, final inspection & 1st article approval of manufactured and assembled hardware.
They will verify processes as required to ensure drawing and material specifications are satisfied.
The successful candidate must be familiar with a manufacturing environment, have computer knowledge, a self-starter who pays attention to detail and accuracy and taking responsibility for their work.
FLSA Classification:
Hourly NonexemptType:
Full-timeWork hours:
Monday - Friday, 6:
30am-2:
30pm.
Some overtime and weekend work may be necessary.
Hours may be adjusted at the discretion of your supervisor.
Salary Range:
$25.
00 - $32.
00 per hourReports to:
Quality ManagerLocation:
100% at 350 Imperial Blvd.
Cape Canaveral, FL 32920 USAEssential Duties (which include, but not limited to):
Conduct in-process and/or final inspections of parts as required using FARO inspection arm and Polyworks software, or other tools as necessary.
Ensure material products and processes (paint, anodize, chem-film, etc.
) are applied in accordance with applicable drawings and specification requirements.
Oversee the receipt and inspection of incoming material to ensure they meet job requirements per print and purchase orders.
Create AS9102 compliant FAIR's for customer approval as required.
Use InspectionXpert to balloon prints and generate DIR and AS9102 forms.
Manage part configuration revision changes for Print to CAD errors and create verisurf validation reports.
Manage calibrated tools to ensure that gages and measuring instruments are within calibration interval prior to use.
Serve as the Quality Assurance representative to the Materials Review Board (MRB) and manage the MRB process.
Ensure nonconforming materials are isolated/quarantined from acceptable parts and are properly documented and controlled.
Lead Root Cause and Corrective Action investigations, interfacing with the Hera team as applicable.
Interface with customers on complaints & returns, and on customer corrective action requests.
Interfacing with machinists and production personnel related to his/her workmanship and determine if other quality issues exist.
Review initial job templates for accuracy using customer blueprints, purchase orders and customer specifications.
Review and stamp off on released travelers that require Traveler Review.
Review all customer purchase orders for acceptance and quality clauses implementation as required.
Prepare shipments packets per customer purchase order for completed jobs ready to ship.
Scheduling of in-process and final inspection source for various customers as required per purchase orders.
Coordinate customer-required audits and act as primary contact during the entire audit process.
Coordinate and execute internal procedural and part configuration audits at planned intervals and provide information on whether the quality management system conform to:
Internal QMS, Requirements of AS9100, Customer requirements.
Learn cross-functional operations and provide training to the team to perform cross-functional operations.
Support 5-S and adhere to health, safety, and environmental company guidelines.
The above statements are intended to describe the general nature and level of work being performed by the individual(s) assigned to this position.
Management reserves the right to modify, add, or remove duties and to assign other duties as necessary.
They are not intended to be an exhaustive list of all duties, responsibilities, and skills required.
Minimum Requirements:
Knowledge of PCMM Faro Arm w/Laser line probe and familiarity with Polyworks IMinspect and/or Verisurf.
Minimum 3 years' Inspection/Quality experience in manufacturing environment.
Must have computer understanding of Microsoft Word, Excel and Outlook.
Must be able to interpret drawings including GD&T.
Ability to multi-task and prioritize inspection duties,Ability to work with others in a fast-changing environment.
Ability to understand PO requirements and verification of Certificate of Conformance.
Knowledge of mechanical measuring tools including but not limited to, micrometers, calipers, scales, pin and radius gages, height gage, surface finish comparator, dial indicator, etc.
Ability to communicate effectively in oral and written English.
Ability to learn cross-functional operations and provide training to the team to perform cross-functional operations.
Work authorization:
Must be US Citizen or Authorized to work in the US.
Must be willing to undergo and pass a criminal background check.
Must be able to pass a pre-employment physical examination, including an alcohol and drug test.
Work environment:
Employees spend most of the day on their feet and must follow strict safety rules.
They wear safety glasses to protect their eyes from airborne debris.
Loud noise from machinery requires the use of hearing protectors.
They wear hard toe shoes or boots to protect their feet from potentially dropped objects.
Physical requirements:
Prolonged periods sitting at a desk and working on a computer.
Must be able to safely lift 25 pounds at times.
Ability to stand for extensive periods of time.
Sit, Stoop, Kneel and Crouch.
Must be able to navigate warehouse and reach items both high and low.
Hera Technologies, LLC Company ProfileHera Technologies, LLC is a world-class contract Aerospace Manufacturing firm that produces high quality built-to-print and built-to-model metallic and nonmetallic components for the Space, Aerospace, Defense, and Commercial Airline industries.
We are a team of talented, ethical and motivated individuals committed to providing our customers with superior quality products delivered on time and aimed to exceed customer expectations.
We provide a safe and rewarding work environment that acknowledges individual achievement and promotes entrepreneurial spirit, and teamwork.
Hera Technologies, LLC specializes in CNC machining, knife cutting, laser cutting, structural bonding and painting, processing and kitting of a wide variety of metallic, and engineered materials.
Our CNC work centers, high-speed routing machines and knife cutting systems offer 2D cutting and 3, 4 and 5-axis milling of a wide range of materials including:
single-ply materials, composites, honeycomb core, plastics, ferrous and non-ferrous metals.
Benefits:
Company paid employee medical, dental and vision insurance Retirement plan option upon eligibility Paid Time Off (PTO) 10 paid holidays Tuition reimbursement Discretionary bonuses Incentivized cash-based employee referral programMany other great company perks including Hera branded merchandise, a great work environment, and a supportive management team!Hera Technologies is proud to be an Equal Opportunity Employer.
We maintain a drug-free workplace and retain the option to perform substance abuse testing before and during employment.
About the Company:
Hera Technologies LLC.
Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
